ماكينة تصوير كيوسيرا 5100

مواصفات ماكينة تصوير كيوسيرا 5100:

الموديل : 5100ci .
بها تصوير و طباعة و فيدر و سكانر و فاكس
طابعة ألوان ليزر ياباني
امكانية الطباعة على الوجهين (دوبلكس)
سرعة الماكينة : 25 نسخة في الدقيقة الواحدة
دقة ووضوح الطباعة : 1200 x 1200 dpi
دقة ووضوح التصوير : 1200 x 1200 dpi
مقاس الورق :A4
الذاكرة : 3,072MB
زمن التسخين : 20 ثانية
التكبير و التصغير : من 25% إلى 400% ( الزيادة و النقص بي1%)
عدد النسخ الممكن انتاجها بضغطة واحدة : 1-999 صورة
زمن خروج أول ورقة : 6.4 ثواني
الوزن : 49.6 kg

تعريف ماكينة كيوسيرا kyocera taskalfa 5100

لتعريف ماكينة تصوير كيوسيرا 5100 اضغط هنا

سعر ماكينة تصوير كيوسيرا 5100

سعر ماكينة تصوير كيوسيرا 5100 استعمال الخارج ( )
سعر ماكينة تصوير كيوسيرا 5100 جديدة ( )

كتالوج ماكينة تصوير كيوسيرا 5100

لتحميل كتالوج آلة كيوسيرا5100 اضغط هنا

أعطال ماكينة كيوسيرا kyocera taskalfa5100

عطل كودي رقم: Code: 0130

Description:Backup memory (EEPROM) read/write error [Main PWB]

Reading from / writing to EEPROM (U4) cannot be performed.

Causes:Defective EEPROM (U4).

Remedy:Defective EEPROM (U4). Replace the main PWB.

Defective main PWB. Replace the main PWB.

عطل كودي رقم: Code: 0140

Description:Backup memory (EEPROM) data error [Main PWB]

Data read from EEPROM (U4) is judged abnormal.

Causes:Defective EEPROM (U4). Defective engine PWB.

Remedy:Defective EEPROM (U4). Replace the main PWB.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 0150

Description:Engine PWB (EEPROM) error

Data read from EEPROM (U4) is judged abnormal.

Causes:Improper installation EEPROM (U4). Defective engine PWB.

Remedy:Improper installation EEPROM (U4). Check the installation of the EEPROM (U4) and remedy if necessary.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 0420

Description:Paper feeder communication error

Communication error between engine PWB and optional paper feeder.

Causes:Improper installation paper feeder. Defective harness between PF main PWB (YC3, YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main PWB. Defective harness between engine PWB (YC33) and paper feeder interface connector, or improper connector insertion. Defective engine PWB.

Remedy:Improper installation paper feeder. Follow installation instruction carefully again.

Defective harness between PF main PWB (YC3, YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective harness between engine PWB (YC33) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 0600

Description:Expanded memory (DIMM) installing error

The expansion memory modules (DIMM) are not correctly mounted.

Causes:Improper installation expanded memory (DIMM).

Remedy:Improper installation expanded memory (DIMM). Check the installation of the expanded memory (DIMM) and remedy if necessary.

عطل كودي رقم: Code: 0610

Description:Expanded memory (DIMM) error

The expansion memory modules (DIMM) mounted on the main PWB does not operate correctly.

Causes:Defective expanded memory (DIMM). Defective main PWB.WB.

Remedy:Defective expanded memory (DIMM). Replace the expanded memory (DIMM).

Defective main PWB. Replace the main PWB.

عطل كودي رقم: Code: 0930

Description:I2C bus error

Causes:Defective main PWB.

Remedy:Defective main PWB. Replace the main PWB.

عطل كودي رقم: Code: 1010

Description:Lift motor error

The main motor ready input is not given for 5 s during the main motor is ON.

Causes:Defective bottom plate elevation mechanism in the cassette. Defective drive transmission system of the lift motor. Defective lift motor. Defective engine PWB.

Remedy:Defective bottom plate elevation mechanism in the cassette. Check to see if the bottom plate can move smoothly and repair it if any problem is found.

Defective drive transmission system of the lift motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective lift motor. Replace the lift motor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 1020, 1030, 1040

Description:PF lift motor error (Option paper feeder)

When the PF lift motor is driven, the PF lift motor over-current detection signal is detected for 2 ms 150 times or detected continuously for 300 ms. After the PF lift motor is driven, the ON status of PF lift limit sensor cannot be detected for 10 s. The cassette installed confirmation message is displayed on the printer operation panel, and even if the cassette is opened and closed, the cassette installed confirmation message is displayed five times successively. 1020: Paper feeder 1 1030: Paper feeder 2 1040: Paper feeder 3

Causes:Defective harness between PF lift motor and PF main PWB (YC7), or improper connector insertion. Defective bottom plate elevation mechanism in the cassette. Defective drive transmission system of the PF lift motor. Defective PF lift motor. Defective PF lift limit sensor. Defective PF cassette size switch. Defective PF main PWB. Defective engine PWB.

Remedy:Defective harness between PF lift motor and PF main PWB (YC7), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective bottom plate elevation mechanism in the cassette. Check to see if the bottom plate can move smoothly and repair it if any problem is found.(Refer to the service manual for the paper feeder).

Defective drive transmission system of the PF lift motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.(Refer to the service manual for the paper feeder).

Defective PF lift motor. Replace the PF lift motor. (Refer to the service manual for the paper feeder).

Defective PF lift limit sensor. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective PF cassette size switch. Replace the PF cassette size switch.(Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 1500, 1520, 1540

Description:PF warm air heater (upper blower) high temperature error* (Option paper feeder)

A temperature higher than 85°C/185°F is detected. *: Multi purpose feeder only 1500: Paper feeder 1 1520: Paper feeder 2 1540: Paper feeder 3

Causes:The inlet of upper blower assembly is blocked by paper pieces or the like. Defective harness between PF warm air fan motor 2 and PF main PWB (YC11), or improper connector insertion. Shorted PF thermistor 2. Defective PF warm air fan motor 2. Defective PF main PWB. Defective engine PWB.

Remedy:The inlet of upper blower assembly is blocked by paper pieces or the like. Check visually and remove it, if any (Refer to the service manual for the paper feeder).

Defective harness between PF warm air fan motor 2 and PF main PWB (YC11), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Shorted PF thermistor 2. Replace the PF thermistor 2 (Refer to the service manual for the paper feeder).

Defective PF warm air fan motor 2. Replace the PF warm air fan motor 2 (Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 1510, 1530, 1550

Description:PF warm air heater (side blower) high temperature error* (Option paper feeder)

A temperature higher than 85°C/185°F is detected. *: Multi purpose feeder only 1510: Paper feeder 1 1530: Paper feeder 2 1550: Paper feeder 3

Causes:The inlet of side blower assembly is blocked by paper pieces or the like. Defective harness between PF warm air fan motor 1 and PF main PWB (YC11), or improper connector insertion. Shorted PF thermistor 1. Defective PF warm air fan motor 1. Defective PF main PWB. Defective engine PWB.

Remedy:The inlet of side blower assembly is blocked by paper pieces or the like. Check visually and remove it, if any (Refer to the service manual for the paper feeder).

Defective harness between PF warm air fan motor 1 and PF main PWB (YC11), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Shorted PF thermistor 1. Replace the PF thermistor 1. (Refer to the service manual for the paper feeder).

Defective PF warm air fan motor 1. Replace the PF warm air fan motor 1 (Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 1600, 1620, 1640

Description:PF warm air heater (upper blower) low temperature error* (Option paper feeder)

An external temperature higher than +5°C/+41°F is not detected when one minute elapses after PF warm air heater 2 is turned on. *: Multi purpose feeder only 1600: Paper feeder 1 1620: Paper feeder 2 1640: Paper feeder 3

Causes:Defective harness between PF warm air heater 2 and PF warm air heater driver PWB (YC2), or improper connector insertion. Defective harness between PF warm air heater driver PWB (YC3) and PF main PWB (YC13), or improper connector insertion. Defective harness between PF thermistor 2 and PF main PWB (YC12), or improper connector insertion. PF thermistor 2 installed incorrectly. Defective PF thermistor 2. PF thermal cutout 2 triggered. Broken PF warm air heater 2. Defective PF warm air heater driver PWB. Defective PF main PWB. Defective engine PWB.

Remedy:Defective harness between PF warm air heater 2 and PF warm air heater driver PWB (YC2), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective harness between PF warm air heater driver PWB (YC3) and PF main PWB (YC13), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective harness between PF thermistor 2 and PF main PWB (YC12), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

PF thermistor 2 installed incorrectly. Check the installation of the PF thermistor 2 and remedy if necessary (Refer to the service manual for the paper feeder).

Defective PF thermistor 2. Replace the PF thermistor 2 (Refer to the service manual for the paper feeder).

PF thermal cutout 2 triggered. Replace the PF thermal cutout 2 (Refer to the service manual for the paper feeder).

Broken PF warm air heater 2. Replace the PF warm air heater 2 (Refer to the service manual for the paper feeder).

Defective PF warm air heater driver PWB. Replace the PF warm air driver PWB (Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 1610, 1630, 1650

Description:PF warm air heater (side blower) error* (Option paper feeder)

An external temperature higher than +5°C/+41°F is not detected when one minute elapses after PF warm air heater 2 is turned on. *: Multi purpose feeder only 1610: Paper feeder 1 1630: Paper feeder 2 1650: Paper feeder 3

Causes:Defective harness between PF warm air heater 1 and PF warm air heater driver PWB (YC1), or improper connector insertion. Defective harness between PF warm air heater driver PWB (YC3) and PF main PWB (YC13), or improper connector insertion. Defective harness between PF thermistor 2 and PF main PWB (YC12), or improper connector insertion. PF thermistor 1 installed incorrectly. Defective PF thermistor 1. PF thermostat 1 triggered. Broken PF warm air heater 1. Defective PF warm air heater driver PWB. Defective PF main PWB. Defective engine PWB.

Remedy:Defective harness between PF warm air heater 1 and PF warm air heater driver PWB (YC1), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective harness between PF warm air heater driver PWB (YC3) and PF main PWB (YC13), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.(Refer to the service manual for the paper feeder).

PF thermistor 1 installed incorrectly. Check the installation of the PF thermistor 1 and remedy if necessary (Refer to the service manual for the paper feeder).

Defective PF thermistor 1. Replace the PF thermistor 1 (Refer to the service manual for the paper feeder).

PF thermostat 1 triggered. Replace the PF thermostat 1 (Refer to the service manual for the paper feeder).

Broken PF warm air heater 1. Replace the PF warm air heater 1 (Refer to the service manual for the paper feeder).

Defective PF warm air heater driver PWB. Replace the PF warm air driver PWB (Refer to the service manual for the paper feeder).

Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 2102

Description:Developing motor MCY error

The ready signal cannot be detected within five seconds after the developing motor MCY turns on.

Causes:Defective harness between developing motor MCY and engine PWB (YC27), or improper connector insertion. Defective drive transmission system of the developing motor MCY. Defective developing motor MCY. Defective engine PWB.

Remedy:Defective harness between developing motor MCY and engine PWB (YC27), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder).

Defective drive transmission system of the developing motor MCY. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective developing motor MCY. Replace the developing motor MCY.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 2250

Description:Main charger cleaning motor error

A main charger cleaning motor over-current signal is detected for 5 seconds in total while the main charger cleaning motor is ON.

Causes:Defective harness between main charger cleaning motor and engine PWB (YC36), or improper connector insertion. MCY. Defective drive transmission system of the main charger cleaning motor.C36), Defective main charger cleaning motor. Defective engine PWB.

Remedy:Defective harness between main charger cleaning motor and engine PWB (YC36), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the main charger cleaning motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective main charger cleaning motor. Replace the main charger cleaning motor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 2500

Description:Paper feed motor error

The main motor ready input is not given for 5 s during the main motor is ON.

Causes:Defective harness between paper feed motor and engine PWB (YC3/ YC4), or improper connector insertion. Defective drive transmission system of the paper feed motor. Defective paper feed motor. Defective engine PWB.

Remedy:Defective harness between paper feed motor and engine PWB (YC3/ YC4), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the paper feed motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective paper feed motor. Replace the paper feed motor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 2610, 2620, 2630

Description:PF paper feed motor error (Option paper feeder)

The PF paper feed motor of paper feeder 1 ready input is not given for 5 s during the PF paper feed motor is ON. 2610: Paper feeder 1 2620: Paper feeder 2 2630: Paper feeder 3

Causes:Defective harness between PF paper feed motor and PF main PWB (YC6), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor.or MCY. Defective PF main PWB.r.or MCY. Defective printer’s engine PWB.

Remedy:Defective harness between PF paper feed motor and PF main PWB (YC6), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. (Refer to the service manual for the paper feeder).

Defective PF paper feed motor drive transmission system. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. (Refer to the service manual for the paper feeder).

Defective PF main motor. Replace the PF main motor.

Defective PF main PWB. Replace the PF main PWB.

Defective printer’s engine PWB. Replace the printer’s engine PWB (Refer to the service manual for the printer).

عطل كودي رقم: Code: 2830

Description:Developing motor K error

The ready signal cannot be detected within 5 seconds after the developing motor K turns on.

Causes:Defective harness between developing motor K and engine PWB (YC26), or improper connector insertion. Defective drive transmission system of the developing motor K. Defective developing motor K. Defective engine PWB.

Remedy:Defective harness between developing motor K and engine PWB (YC26), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder).

Defective drive transmission system of the developing motor K. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective developing motor K. Replace the developing motor K.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4001

Description:Polygon motor YK error

The polygon motor YK ready input is not given for 10 s during the polygon motor YK is ON.я

Causes:Defective harness between polygon motor YK and engine PWB (YC29), or improper connector insertion. Defective laser scanner unit YK. Defective engine PWB.

Remedy:Defective harness between polygon motor YK and engine PWB (YC29), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective laser scanner unit YK. Replace the laser scanner unit YK.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4002

Description:Polygon motor MC error

The polygon motor MC ready input is not given for 10 s during the polygon motor MC is ON. PWB.

Causes:Defective harness between polygon motor MC and engine PWB (YC30), or improper connector insertion. Defective laser scanner unit MC. Defective engine PWB.

Remedy:Defective harness between polygon motor MC and engine PWB (YC30), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective laser scanner unit MC. Replace the laser scanner unit MC.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4201

Description:Laser output error (Black)

The pin photo signal (PDN) is not output from PD PWB K for one second while laser is emitted.

Causes:Defective harness between APC PWB K and engine PWB (YC29), or improper connector insertion. Defective APC PWB K. Defective PD PWB K. Defective engine PWB.

Remedy:Defective harness between APC PWB K and engine PWB (YC29), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective APC PWB K. Replace the laser scanner unit YK.

Defective PD PWB K. Replace the laser scanner unit YK.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4202

Description:Laser output error (Cyan)

The pin photo signal (PDN) is not output from PD PWB C for one second while laser is emitted.

Causes:Defective harness between APC PWB C and engine PWB (YC30), or improper connector insertion. Defective APC PWB C. Defective engine PWB.

Remedy:Defective harness between APC PWB C and engine PWB (YC30), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective APC PWB C. Replace the laser scanner unit MC.

Defective PD PWB C. Replace the laser scanner unit MC.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4203

Description:Laser output error (Magenta)

The pin photo signal (PDN) is not output from PD PWB M for one second while laser is emitted.

Causes:Defective harness between APC PWB M and engine PWB (YC30), or improper connector insertion. Defective APC PWB M. Defective PD PWB M. Defective engine PWB.

Remedy:Defective harness between APC PWB M and engine PWB (YC30), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective APC PWB M. Replace the laser scanner unit MC.

Defective PD PWB M. Replace the laser scanner unit MC.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4204

Description:Laser output error (Yellow)

The pin photo signal (PDN) is not output from PD PWB Y for one second while laser is emitted.

Causes:Defective harness between APC PWB Y and engine PWB (YC29), or improper connector insertion. Defective APC PWB Y. Defective PD PWB Y. Defective engine PWB.

Remedy:Defective harness between APC PWB Y and engine PWB (YC29), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective APC PWB Y. Replace the laser scanner unit YK.

Defective PD PWB Y. Replace the laser scanner unit YK.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4600

Description:LSU cleaning motor error

A LSU cleaning motor over-current signal is detected for 5 seconds in total while the LSU cleaning motor is ON.

Causes:Defective harness between LSU cleaning motor and engine PWB (YC37), or improper connector insertion. Defective drive transmission system of the LSU cleaning motor. Defective LSU cleaning motor. Defective engine PWB.

Remedy:Defective harness between LSU cleaning motor and engine PWB (YC37), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the LSU cleaning motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective LSU cleaning motor. Replace the LSU cleaning motor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 4700

Description:VIDEO ASIC device error (Main PWB)

Data read from EEPROM is judged abnormal.

Causes:Defective main PWB.

Remedy:Defective main PWB. Replace the main PWB.

عطل كودي رقم: Code: 5301

Description:Broken eraser lamp K wire

A disconnection detection signal for eraser lamp K is detected for one second while eraser lamp K is ON.is ON.

Causes:Defective harness between drum unit K and drum relay PWB (YC2/YC3), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective eraser lamp K. Defective engine PWB.

Remedy:Defective harness between drum unit K and drum relay PWB (YC2/YC3), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective eraser lamp K. Replace the drum unit K..

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 5302

Description:Broken eraser lamp C wire

A disconnection detection signal for eraser lamp C is detected for one second while eraser lamp C is ON.is ON.

Causes:Defective harness between drum unit C and drum relay PWB (YC8/YC9), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective eraser lamp C. Defective engine PWB.

Remedy:Defective harness between drum unit C and drum relay PWB (YC8/YC9), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective eraser lamp C. Replace the drum unit C.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 5303

Description:Broken eraser lamp M wire

A disconnection detection signal for eraser lamp M is detected for one second while eraser lamp M is ON.is ON.

Causes:Defective harness between drum unit M and drum relay PWB (YC11/ YC12), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective eraser lamp M. Defective engine PWB.

Remedy:Defective harness between drum unit M and drum relay PWB (YC11/ YC12), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective eraser lamp M. Replace the drum unit M.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 5304

Description:Broken eraser lamp Y wire

A disconnection detection signal for eraser lamp Y is detected for one second while eraser lamp Y is ON.is ON.

Causes:Defective harness between drum unit Y and drum relay PWB (YC5/YC6), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective eraser lamp Y. Defective engine PWB.

Remedy:Defective harness between drum unit Y and drum relay PWB (YC5/YC6), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective eraser lamp Y. Replace the drum unit Y.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 6000

Description:Broken fuser heater lamp wire

The detected fuser thermistor temperature does not rise 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 5 seconds in warming up. The fuser temperature does not reach 100°C/212°F after the fuser heater lamp has been turned on continuously for 30 seconds in warming up. The temperature does not rise 1°C/1.8°F after the fuser heater lamp has been turned on continuously 5 s.

Causes:Defective harness between fuser thermistor and paper exit PWB (YC4), or improper connector insertion. Defective harness between paper exit PWB (YC1) and engine PWB (YC20), or improper connector insertion. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire. Defective engine PWB.

Remedy:Defective harness between fuser thermistor and paper exit PWB (YC4), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective harness between paper exit PWB (YC1) and engine PWB (YC20), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Fuser thermistor installed incorrectly. Replace the fuser unit.

Fuser thermal cutout triggered. Replace the fuser unit.

Fuser heater lamp installed incorrectly. Replace the fuser unit.

Broken fuser heater lamp wire. Replace the fuser unit.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 6020

Description:Abnormally high fuser thermistor temperature

The fuser thermistor detects a temperature higher than 220°C/428°F for 10 seconds. The fuser thermistor detects a temperature higher than 240°C/464°F for 1 second.

Causes:Shorted fuser thermistor. wire. Defective engine PWB.

Remedy:Shorted fuser thermistor. Replace the fuser unit.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 6030

Description:Broken fuser thermistor wire

Input from fuser thermistor is 0 (A/D value).

Causes:Defective harness between fuser thermistor and paper exit PWB (YC4), or improper connector insertion. Defective harness between paper exit PWB (YC1) and engine PWB (YC20), or improper connector insertion. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire. Defective engine PWB.

Broken fuser thermistor wire. Replace the fuser unit.

Fuser thermistor installed incorrectly. Replace the fuser unit.

Fuser thermal cutout triggered. Replace the fuser unit.

Fuser heater lamp installed incorrectly. Replace the fuser unit.

Broken fuser heater lamp wire. Replace the fuser unit.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 6400

Description:Zero cross signal error

The zero cross signal does not reach the engine PWB for specified time.

Causes:Defective harness between power source PWB (YC103) and engine PWB (YC19), or improper connector insertion. Defective power source PWB. Defective engine PWB.

Remedy:Defective harness between power source PWB (YC103) and engine PWB (YC19), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective power source PWB. Replace the power source PWB.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7001

Description:Toner motor K error

Over-current at toner motor K is detected for 80 ms in total while toner motor K is ON.

Causes:Defective harness between toner motor K and engine PWB (YC22), or improper connector insertion. Defective drive transmission system of the toner motor K. Defective toner motor K. Defective engine PWB.

Remedy:Defective harness between toner motor K and engine PWB (YC22), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the toner motor K. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective toner motor K. Replace the toner motor K.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7002

Description:Toner motor C error

Over-current at toner motor C is detected for 80 ms in total while toner motor C is ON.

Causes:Defective harness between toner motor C and engine PWB (YC24), or improper connector insertion. Defective drive transmission system of the toner motor C. Defective toner motor C. Defective engine PWB.

Remedy:Defective harness between toner motor C and engine PWB (YC24), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the toner motor C. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective toner motor C. Replace the toner motor C.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7003

Description:Toner motor M error

Over-current at toner motor M is detected for 80 ms in total while toner motor M is ON.

Causes:Defective harness between toner motor M and engine PWB (YC25), or improper connector insertion. Defective drive transmission system of the toner motor M. Defective toner motor M. Defective engine PWB.

Remedy:Defective harness between toner motor M and engine PWB (YC25), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the toner motor M. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective toner motor M. Replace the toner motor M.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7004

Description:Toner motor Y error

Over-current at toner motor Y is detected for 80 ms in total while toner motor Y is ON.

Causes:Defective harness between toner motor Y and engine PWB (YC23), or improper connector insertion. Defective drive transmission system of the toner motor Y. Defective toner motor Y. Defective engine PWB.

Remedy:Defective harness between toner motor Y and engine PWB (YC23), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective drive transmission system of the toner motor Y. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.

Defective toner motor Y. Replace the toner motor Y.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7401

Description:Developing unit K non-installing error

No density detection signal is output from toner sensor K in developing unit K.

Causes:Defective harness between developing unit K and drum relay PWB (YC4), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective toner sensor K. Defective engine PWB.

Remedy:Defective harness between developing unit K and drum relay PWB (YC4), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective toner sensor K. Replace the developing unit K.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7402

Description:Developing unit C non-installing error

No density detection signal is output from toner sensor C in developing unit C.

Causes:Defective harness between developing unit C and drum relay PWB (YC10), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective toner sensor C. Defective engine PWB.

Remedy:Defective harness between developing unit C and drum relay PWB (YC10), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective toner sensor C. Replace the developing unit C.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7403

Description:Developing unit M non-installing error

No density detection signal is output from toner sensor M in developing unit M.

Causes:Defective harness between developing unit M and drum relay PWB (YC13), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective toner sensor M. Defective engine PWB.

Remedy:Defective harness between developing unit M and drum relay PWB (YC13), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective toner sensor M. Replace the developing unit M.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7404

Description:Developing unit Y non-installing error

No density detection signal is output from toner sensor Y in developing unit Y.

Causes:Defective harness between developing unit Y and drum relay PWB (YC7), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective toner sensor Y. Defective engine PWB.

Remedy:Defective harness between developing unit Y and drum relay PWB (YC7), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective toner sensor Y. Replace the developing unit Y.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7411

Description:Drum unit K non-installing error

The EEPROM of drum PWB K does not communicate normally. Incompatible drum unit K is installed.

Installation of incompatible drum unit K. Install drum unit K compatible with the specifications to the printer.

Defective drum PWB K. Replace the drum unit Y.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7412

Description:Drum unit C non-installing error

The EEPROM of drum PWB C does not communicate normally. Incompatible drum unit C is installed.

Installation of incompatible drum unit C. Install drum unit C compatible with the specifications to the printer.

Defective drum PWB C. Replace the drum unit C.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7413

Description:Drum unit M non-installing error

The EEPROM of drum PWB M does not communicate normally. Incompatible drum unit M is installed.

Installation of incompatible drum unit M. Install drum unit M compatible with the specifications to the printer.

Defective drum PWB M. Replace the drum unit M.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7414

Description:Drum unit Y non-installing error

The EEPROM of drum PWB Y does not communicate normally. Incompatible drum unit Y is installed.

Installation of incompatible drum unit Y. Install drum unit Y compatible with the specifications to the printer.

Defective drum PWB Y. Replace the drum unit Y.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7601

Description:Left ID sensor error

The detected signal of left ID sensor is abnormal.

Causes:Defective harness between left ID sensor and engine PWB (YC5), or improper connector insertiontion. Defective left ID sensor. Defective engine PWB.

Remedy:Defective harness between left ID sensor and engine PWB (YC5), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective left ID sensor. Replace the left ID sensor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: 7602

Description:Right ID sensor error

The detected signal of right ID sensor is abnormal.

Causes:Defective harness between right ID sensor and engine PWB (YC6), or improper connector insertion. Defective right ID sensor. Defective engine PWB.

Remedy:Defective harness between right ID sensor and engine PWB (YC6), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective right ID sensor. Replace the right ID sensor.

Defective engine PWB. Replace the engine PWB.

عطل كودي رقم: Code: F000

Description:Main PWB – Operation panel PWB communication error

Causes:Defective main PWB. Defective operation panel PWB.

Remedy:Defective main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

Defective operation panel PWB. Replace the operation panel PWB.

عطل كودي رقم: Code: F010

Description:Main PWB checksum error

Causes:Defective main PWB.

Remedy:Defective main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

عطل كودي رقم: Code: F020

Description:Main memory or expanded memory checksum error

Causes:Defective main memory (RAM) on the main PWB. Defective expansion memory module.

Remedy:Defective main memory (RAM) on the main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

Defective expansion memory module. Replace the expansion memory module.

عطل كودي رقم: Code: F030

Description:Main PWB general failure

Causes:Defective main PWB.

Remedy:Defective main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

عطل كودي رقم: Code: F040

Description:Main PWB – Engine PWB communication error

Causes:Defective harness between engine PWB (YC31) and main PWB (YC6), or improper connector insertion. Defective main PWB. Defective engine PWB.

Remedy:Defective harness between engine PWB (YC31) and main PWB (YC6), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.

Defective main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

Defective engine PWB. Replace engine PWB.

عطل كودي رقم: Code: F050

Description:Engine PWB ROM checksum error

Causes:Some error may have occurred when downloading the firmware of the engine PWB. Defective engine PWB.

Remedy:Some error may have occurred when downloading the firmware of the engine PWB. Download the firmware of the engine PWB again using the memory card.

Defective engine PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace engine PWB.

عطل كودي رقم: Code: F226

Description:Main PWB video data control error

Causes:Defective main PWB.

Remedy:Defective main PWB. Turn the power switch off/on to restart the printer. If the error is not resolved, replace main PWB.

طابعات وادوات انك جيت

ماكينة تصوير كيوسيرا 5100

ماكينة تصوير كيوسيرا 5100